silk screen printing machine printer

Semi auto screen printing machine

Semi-automatic screen printing machine maintenance should be scheduled by people at regular intervals. Maintaining the equipment can extend the service life of the equipment and ensure a safe and comfortable working environment. Its main content should include:

1. The semi auto screen printing machine must meet the working content, working methods, tools and materials used, standards and precautions that are neat, clean, firm, lubricated, anti-corrosive, and safe.

1. The operator of the equipment should first check whether the air source and power supply of the equipment are normal after work every day, then start the machine, let the machine idling for 3 to 5 minutes, and listen carefully for abnormal noise. If an abnormality is found, it must be eliminated first. working. The screws that must be locked must be tightened before the machine operates.

2. The staff on duty must ensure that the entire machine, corrosive or flammable materials cannot be placed on the surface of the machine, and the ink and debris on the equipment should be cleaned up during the shift.

3. Send someone to regularly add lubricating oil to the moving parts of the machine. Pneumatic machines should clear the water in the filter every day to ensure that the air source is dry, and place the water to run into the pneumatic parts.

2. The electrical part of the semi-automatic screen printing machine is overhauled.

The structure of the domestic semi auto silk screen printing machine is divided into the worktable lifting and the screen frame sliding left and right. Here is a brief introduction to the simple maintenance methods of the common faults of the pneumatic semi-automatic screen printing machine.

1. Press the start button and there is no malfunction of the workbench: First, we check whether the air source of the machine is connected and whether the lifting solenoid valve is damaged. If it is damaged, replace it.

2. The workbench has been raised and the screen frame has no action: first check whether the lifting sensor of the workbench has sensed a signal output, and after troubleshooting, check whether the solenoid valves on the left and right of the control screen frame are damaged or blocked. After clearing the above two types of faults, the machine should be able to proceed to the next step.

3. The machine has finished printing and cannot return ink, and the workbench cannot return to the original position to alarm: first check whether the sensor on the right side of the screen frame is sensed or damaged. After troubleshooting, the machine can work normally. 

If you want to extend the service life of the semi auto screen printing machine, you must ensure the regular maintenance of the semi auto screen printing machine, and know how to troubleshoot the semi-automatic screen printing machine. To extend the service life of the semi-automatic screen printing machine, it is also necessary to choose a semi autoscreen printing machine with good materials.