Welcome to our websites!

Introduction to the characteristics of the large glass screen printing machine

The simple process of the large glass screen printing machine-the front-end automatic conveying glass machine → the large four-column glass screen printing machine screen printing → the back end of the automatic conveying glass machine → the glass screen printing drying tunnel after baking is the glass screen printing product. Full Screen Printing large-scale production of glass screen printing machine has fifteen years of history, to introduce the following large-scale glass printer features Full Screen printed.

Large glass screen printing machine pictures.

safcdsg

 glass automatic screen printing machine

1. Transmission mode of large glass screen printing machine:

It adopts a big brand brake motor, which is transmitted to the rod shaft through a round belt to drive the glass sheet. The rod shaft is equipped with a wear-resistant and solvent-resistant rubber ring to drive the glass sheet to be transported. It is matched with the Taiwan Shilin frequency converter. Make the glass sheet stable and safe in the process of conveying, and the conveying speed can be adjusted according to the needs.

2. The lifting method of the head of the large glass screen printing machine :

The machine head lifting is realized through chain transmission by a big brand brake clutch reducer, which can make the machine head self-lock at any position. The wiper position is equipped with a cylinder safety protection device and an optical fiber safety protection device to ensure the safety performance of the machine. The lifting guide rod adopts the German (INA) brand. There are double protection switches at the highest and lowest positions of lifting to prevent damage to the machine and the safety of the operator.

3. The positioning method of the large glass screen printing machine:

There are 8 positioning points for positioning, which adopts bidirectional drive (upward drive, horizontal drive) for positioning. The positioning pulley adopts imported guide rails and is adjusted with precision ball screws to ensure accurate positioning. It is also equipped with an adjustment hand-wheel and a position display. And adjust the locking device. The adjustment distance can be adjusted arbitrarily between the large glass sheet and the small glass sheet. When positioning, the positioning pulley rises out of the table, and when printing, the positioning pulley is lowered below the table to ensure the printing of various thicknesses of glass.

4. All-pass screen printing large glass screen printing machine printing and ink-returning device

Printing and ink-returning movement adopts Taiwan Wanxin decelerating motor and imported timing belt. Cooperate with imported precision linear guide to pull the printing beam for oil sealing and printing. The stepless speed regulation of printing and sealing oil is achieved through Taiwan Shilin inverter. The lift of the scraper and the oil return knife is driven by an air cylinder and is equipped with an air pressure regulating device. The cylinder pressure can be adjusted according to different printed products. The angle of scraper and oil return knife is adjustable from 0 to 35º. The printing setting has two functions: single printing and double printing.

5. All-pass screen printing large glass screen printing machine off-screen mechanism

 It adopts synchronous off-grid structure design. Cooperate with the squeegee action to raise the plate frame synchronously, and is equipped with a cylinder quick reset device, which does not produce shock waves and elastic fatigue. For various inks with different viscosities, screens with different tensions can reduce shadows and deformations when scraping, and stick to the plates to meet various high-precision printing.

6. All-pass screen printing large glass screen printing machine printing thickness adjustment

The machine head is equipped with an adjustment handle and a position indicator, and the distance between the screen and the printed matter can be adjusted by changing the contact point to the photoelectric switch position.

7. Screen clamping and adjusting device for all-pass screen printing large glass screen printing machine

The screen plate is pushed in by the operating side. The screen plate is clamped by short-side pneumatic clamping. At the same time, it is supplemented with a manual locking device to ensure that the screen plate does not move when there is no air source after get off work. The adjustment device is equipped with four XYZW scale adjustments. The handle can be adjusted in the front, back, left and right directions when adjusting the screen, and the adjustment distance is ±15mm.

All-pass screen printing large glass screen printing machine can design different size production line schemes according to the size of the customer’s enterprise, which is very user-friendly. Of course, the size of the screen printing area is also customized according to the car glass provided by the customer, traditional bus glass, window glass, architectural glass, etc. In addition, the process of multi-color glass can be designed according to the actual needs of customers. At present, the company can apply eight different colors to customize the production line in the glass industry.


Post time: Nov-08-2021